N.Yusoff and F.Yusof (2019) "Characterization of elastic-plastic corner deformation and stress fields",
International Journal of Structural Integrity DOI:10.1108/IJSI-03-2019-0023
F.Yusof and K.H. Leong (2019) "Elastic-plastic J-Tz dominance in bending and tension",
International Journal of Structural Integrity DOI:10.1108/IJSI-04-2019-0031
F.Yusof and K.H. Leong (2018) "Quantification of constraint loss in three-dimensional non-hardening
crack-tip fields",
Jurnal Kejuruteraan, pp. 1-7
N.Yusoff and F.Yusof (2018) "Characterization of elastic-plastic corner deformation and stress fields"
Symposium on Damage Mechanisms in Materials and Structures (SDMMS) 2018, 5 Dec, Bangi.
F.Yusof (2018) "Limits of J-Tz Characterization of three-dimensional elastic-plastic crack tip fields"
Symposium on Damage Mechanisms in Materials and Structures (SDMMS) 2018, 4 Dec, Bangi.
F.Yusof (2017) "Quantification of constraint loss in three-dimensional crack tip fields"
Symposium on Damage Mechanisms in Materials and Structures (SDMMS) 2017, 24 Oct, Bangi.
R.H.A. Latif and F.Yusof (2017) "Asymptotic crack tip fields of surface cracked panels under non-hardening
bending loads",
AIP Conf. Proc., 1865, pp. 030002-1-030002-6
K.H. Leong and F.Yusof (2017) "Validity of J-Q-Tz parameter for three dimensional asymptotic crack-tip
fields in non-hardening materials",
AIP Conf. Proc., 1865, pp. 030004-1-030004-6,
N. Yusoff and F.Yusof (2017) "Assessment of the out-of-plane parameter Tz for a non-hardening
three-dimensional thin plate boundary layer formulations"
AIP Conf. Proc. 1865, pp. 030008-1-030008-6,
R.H.A. Latiff, F.Yusof (2016) "An improved method to model semi-elliptical surface cracks using
element mismatch in ABAQUS"
ARPN Journal of Engineering and Applied Sciences,
vol 11, no. 1, pp. 222-228.
K.H. Leong, F.Yusof (2016) "An improved algorithm of finite element mesh generation for fracture
mechanics analysis"
ARPN Journal of Engineering and Applied Sciences,
vol 11, no. 1, pp. 210-215.
R.H.A. Latiff, F.Yusof (2016) "Asymptotic crack tip fields of surface cracked panels under
non-hardening bending loads"
International Conference on Global Network for Innovative Technology (IGNITE)
2016, 27-29 Jan, Penang.
K.H. Leong, F.Yusof (2016) "Validity of J-Q-Tz parameter for three dimensional asymptotic
crack-tip fields in non-hardening materials",
International Conference on Global Network for Innovative Technology (IGNITE)
2016, 27-29 Jan, Penang.
N. Yusoff, F.Yusof (2016) "Assessment of the out-of-plane parameter Tz for a non-hardening
three-dimensional thin plate boundary layer formulations"
International Conference on Global Network for Innovative Technology (IGNITE)
2016, 27-29 Jan, Penang.
R.H.A. Latiff, F.Yusof (2015) "An improved method to model semi-elliptical surface cracks using
element mismatch in ABAQUS"
International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE)
2015, 24-25 Nov, Kuala Lumpur.
K.H. Leong, F.Yusof (2015) "An improved algorithm of finite element mesh generation for fracture
mechanics analysis"
International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE)
2015, 24-25 Nov, Kuala Lumpur
R.H.A. Latiff, KH Leong, F.Yusof, CC Ooi (2014) "Intermittent failure analysis of electronic wire cable:
Experimental analysis"
International Conference on Global Network for Innovative Technology (IGNITE)
2014, 15-16 Dec, Penang.
IGNITE 2014 Best Paper Award
K.H. Leong, RHA. Latiff, F.Yusof, CC Ooi (2014) "Intermittent failure analysis of electronic wire cable:
Finite element analysis"
International Conference on Global Network for Innovative Technology (IGNITE)
2014, 15-16 Dec Penang.
Yusof, F., Withers, P.J.W., Lopez-Crespo, P., (2013) "Effect of overload on crack closure in thick and
thin specimens via digital image correlation"
International Journal of Fatigue,
56, pp. 17-24.
Withers, P.J.W, Dai,H., P. Lopez-Crespo, A. Steuwer, F. Yusof, J.F. Kelleher, T. Buslaps (2011)
“Overload effects on local fatigue crack-tip strain fields in plane stress samples”
Forni di Sopra (UD),
Italy, March 7-9, ISBN 978-88-95940-32-8.
Yusof, F., Withers, P.J.W., (2009) “Real-time acquisition of fatigue crack images for monitoring
crack-tip stress intensity variations within fatigue cycles”
Journal of Strain Analysis for Engineering Design.
Kelleher, J., Lopez-Crespo, P., Yusof, F., Withers, P.J.W., (2009) “Diffraction studies of fatigue crack
tip mechanics”
5th Intl. Conf on Mech. Stress Eval. by Neutrons and Synchrotron Radiation (MECASENS).
Mito, Japan.
Yusof, F., Withers, P.J.W., (2007) “Crack monitoring and stress intensity factor determination using
digital image correlation.”
The British Society for Strain Measurement (BSSM)
one-day seminar and mini-exhibition (Measuring with vision: Developments and innovations in optical
metrology for engineering), 3rd May, Bristol.
Yusof, F. (2006) “Three-Dimensional Constraint Based Fracture Mechanics" University of Glasgow
(Dept. of Mechanical Engineering).
Yusof, F., Hancock, J.W., (2005) “In-plane and Out-of-plane constraint effects in three-dimensional
elastic perfectly-plastic crack tip field”
International Conference on Fracture (ICF 11), Turin, Italy
Yusof, F., (2002) "Obeservation and analysis of thin microcracked glass" University of Strathclyde
(Dept. of Mechanical Engineering).
Mustapha, M.K., Yusof, F., Ng, C.P., Tan, K.K., (1999) “Liquid Crystal Display: Case Study on Bleeding
and Voids”
Motorola Malaysia Annual Symposium, Penang, Malaysia.
Yusof, F., Zakaria, R. S., (1999) “High Temperature Resistance Electromechanical Components”
Motorola Malaysia Annual Symposium, Penang, Malaysia.
Yusof, F., (1999) “Motorola Penang Liquid Crystal Display Experience” Asia Pacific Liquid Crystal
Display Symposium, Penang, Malaysia.
Khong, C.M., Yusof, F., (1998) “6 sigma Mechanical Tolerance Analysis: Case Study of GP 338 Radios”
Motorola Malaysia Annual Symposium, Penang, Malaysia.
Yusof, F., Chow, K.M., (1997) “Design and implementation of Tact Switch in GP 338 Radios”
Motorola Malaysia Annual Symposium, Penang, Malaysia.