Stress, Damage & Failure Mechanisms Research Group
Principal Investigator
Dr. Feizal Yusof My research interests are centered within computational and experimental solid mechanics and specifically into fracture mechanics. Selected Publications
F.Yusof (2019) "Three-dimensional assessments of crack tip constraint",
Theoretical and Applied Fracture Mechanics vol.101, pp. 1-16. |
Active Co-investigator
Dr. Norwahida Yusoff Selected Publications N. Yusoff and F.Yusof (2019) "Characterization of elastic-plastic corner deformation and stress fields", International Journal of Structural Integrity DOI:10.1108/IJSI-03-2019-0023" |
Current Postgraduate Students
Ms.Wong Siew Kuen Sponsor: Self sponsored My project is concerned with modelling plasticity induce crack closure over a typical fatigue crack growth pertubed by an overload in metallic materials using finite element technique. |
Ms.Sana Zulfiqar Sponsor: HEC Pakistan Co-supervised with Dr Abdullah Aziz Saad. |
Graduated PhD/MSc Students
Mr.Leong Karh Heng Sponsored: MOHE Thesis title: Constraint estimation schemes of deep and shallow cracks. Publications
F.Yusof and K.H. Leong (2019) "Elastic-plastic J-Tz dominance in bending and tension",
International Journal of Structural Integrity (accepted in press) Now pursuing Ph.D at NUS |
Mr.Rizman Hariz Abdul Latif Sponsor: MOHE Thesis title: Constraint estimation schemes of semi-elliptical surface cracks. Publications
R.H.A. Latif and F.Yusof (2017) "Asymptotic crack tip fields of surface cracked panels under
non-hardening bending loads",
AIP Conf. Proc., 1865, pp. 030002-1-030002-6 Now in Sandisk Penang |
Graduated B.Eng Students
Name | Year | Title |
---|---|---|
Muhammad Dhirar As Suhaimi Bin Ismail | 2019 | Three-dimensional fatigue crack growth using Ansys failure mechanism technique |
Muzhaffar Bin Mustaffa Kamal | 2018 | Development of a gas launcher for tension SHPB testing |
Muhammad Shafeeq Bin Abdul Hannan | 2018 | Development of an X-Fem fatigue crack growth model |
Siti Nuraimi Abdul Hamid | 2017 | Development of a crack mouth displacement gauge for fracture mechanics specimens |
Syafazirah Shuhaimi | 2016 | Mechanical Simulation of tensile properties of heat affected zone of aluminium alloy welded joint |
M. Fareez Jaafar | 2016 | Effect of thickness on toughness of thin and thick specimen |
Sim Mun Chun | 2015 | Modelling non-hardening mixed mode asymptotic crack-tip fields |
Ali Akhbar Idris | 2015 | Modelling residual stress effect on crack tip constraint |
M. Faezazren Asmadi | 2015 | A study on the effect of residual stress on electrical wire cables |
Tan Ek Kun | 2015 | A study on four-point-bending deformation mapping using digital image correlation |
Rizman Hariz Abdul Latiff | 2014 | A study on the mechanics of intermittent contact in cable assembly: Experimental Analysis |
Leong Karh Heng | 2014 | A study on the mechanics of intermittent contact in cable assembly: Numerical Analysis |
M.Shazelee Simon | 2014 | Strain analysis of piping system due to internal pressure |
Ng Wai Lun | 2013 | Determination of plane strain fracture toughness of AISI 316L steel using digital image correlation |
Ang Yen Kai | 2013 | Determination of the hardness of nano thickness plating of gold |
Wong Kah Peng | 2013 | Effect of grain orientation of metallic materials to mechanical properties using digital image correlation |
Alex Yeo Siang Chew | 2012 | Determination of residual stress in a cable jacket of a RSM module |
Mohammad Kamaruddin Khalid | 2012 | Failure analysis of RSM cable: Materials characterisation and failure load analysis |
Ang Wei Keat | 2012 | Design and development of a split hopkinson pressure bar for tension loading |
Chew Zhi Yang | 2012 | Development and characterisation of a small scale pressurised system for stress-strain analysis |
Teoh Kong Yi | 2011 | A study on the nature of three-dimensional mixed modes elastic-plastic crack tip fields |
Ruzainy Musa | 2011 | An experimental study of fracture of thin microcracked glass |
Prakash Sogamaur | 2011 | A computational study of fracture of thin microcracked glass |