Skip to main content

backgnd headingcolor usm

Publications

  1. N.Yusoff and F.Yusof (2019) "Characterization of elastic-plastic corner deformation and stress fields", International Journal of Structural Integrity DOI:10.1108/IJSI-03-2019-0023

  2. F.Yusof and K.H. Leong (2019) "Elastic-plastic J-Tz dominance in bending and tension", International Journal of Structural Integrity DOI:10.1108/IJSI-04-2019-0031

  3. Milad, H. Razaviyan, Z., Yusof, F., Mohammadian, E., Alias, A., Akhbari, M., Akhbari, A., Movahedi, F., (2019) "Numerical analysis of side hull configuration in trimaran", Revista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieria
  4. F.Yusof (2019) "Three-dimensional assessments of crack tip constraint", Theoretical and Applied Fracture Mechanics vol.101, pp. 1-16.

  5. F.Yusof and K.H. Leong (2018) "Quantification of constraint loss in three-dimensional non-hardening crack-tip fields", Jurnal Kejuruteraan, pp. 1-7

  6. N.Yusoff and F.Yusof (2018) "Characterization of elastic-plastic corner deformation and stress fields" Symposium on Damage Mechanisms in Materials and Structures (SDMMS) 2018, 5 Dec, Bangi.

  7. F.Yusof (2018) "Limits of J-Tz Characterization of three-dimensional elastic-plastic crack tip fields" Symposium on Damage Mechanisms in Materials and Structures (SDMMS) 2018, 4 Dec, Bangi.

  8. F.Yusof (2017) "Quantification of constraint loss in three-dimensional crack tip fields" Symposium on Damage Mechanisms in Materials and Structures (SDMMS) 2017, 24 Oct, Bangi.

  9. R.H.A. Latif and F.Yusof (2017) "Asymptotic crack tip fields of surface cracked panels under non-hardening bending loads", AIP Conf. Proc., 1865, pp. 030002-1-030002-6

  10. K.H. Leong and F.Yusof (2017) "Validity of J-Q-Tz parameter for three dimensional asymptotic crack-tip fields in non-hardening materials", AIP Conf. Proc., 1865, pp. 030004-1-030004-6,

  11. N. Yusoff and F.Yusof (2017) "Assessment of the out-of-plane parameter Tz for a non-hardening three-dimensional thin plate boundary layer formulations" AIP Conf. Proc. 1865, pp. 030008-1-030008-6,

  12. R.H.A. Latiff, F.Yusof (2016) "An improved method to model semi-elliptical surface cracks using element mismatch in ABAQUS" ARPN Journal of Engineering and Applied Sciences, vol 11, no. 1, pp. 222-228.

  13. K.H. Leong, F.Yusof (2016) "An improved algorithm of finite element mesh generation for fracture mechanics analysis" ARPN Journal of Engineering and Applied Sciences, vol 11, no. 1, pp. 210-215.

  14. R.H.A. Latiff, F.Yusof (2016) "Asymptotic crack tip fields of surface cracked panels under non-hardening bending loads" International Conference on Global Network for Innovative Technology (IGNITE) 2016, 27-29 Jan, Penang.

  15. K.H. Leong, F.Yusof (2016) "Validity of J-Q-Tz parameter for three dimensional asymptotic crack-tip fields in non-hardening materials", International Conference on Global Network for Innovative Technology (IGNITE) 2016, 27-29 Jan, Penang.

  16. N. Yusoff, F.Yusof (2016) "Assessment of the out-of-plane parameter Tz for a non-hardening three-dimensional thin plate boundary layer formulations" International Conference on Global Network for Innovative Technology (IGNITE) 2016, 27-29 Jan, Penang.

  17. R.H.A. Latiff, KH Leong, F.Yusof, CC Ooi, M.R.A. Rahman (2015) "Intermittent audio failure analysis of a remote speaker-microphone for a two-way radio" Journal of Failure Analysis and Prevention, Vol. 16, Issue 1, pp. 75-85, JFAP 2016 Editor Award
  18. R.H.A. Latiff, F.Yusof (2015) "An improved method to model semi-elliptical surface cracks using element mismatch in ABAQUS" International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE) 2015, 24-25 Nov, Kuala Lumpur.

  19. K.H. Leong, F.Yusof (2015) "An improved algorithm of finite element mesh generation for fracture mechanics analysis" International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE) 2015, 24-25 Nov, Kuala Lumpur

  20. R.H.A. Latiff, KH Leong, F.Yusof, CC Ooi (2014) "Intermittent failure analysis of electronic wire cable: Experimental analysis" International Conference on Global Network for Innovative Technology (IGNITE) 2014, 15-16 Dec, Penang. IGNITE 2014 Best Paper Award
  21. K.H. Leong, RHA. Latiff, F.Yusof, CC Ooi (2014) "Intermittent failure analysis of electronic wire cable: Finite element analysis" International Conference on Global Network for Innovative Technology (IGNITE) 2014, 15-16 Dec Penang.

  22. Yusof, F., Withers, P.J.W., Lopez-Crespo, P., (2013) "Effect of overload on crack closure in thick and thin specimens via digital image correlation" International Journal of Fatigue, 56, pp. 17-24.

  23. P. Lopez-Crespo, Withers, P.J.W, F. Yusof, Dai,H, A. Steuwer, J.F. Kelleher, T. Buslaps (2012) “Overload effects on local fatigue crack-tip strain fields under plane stress conditions: surface and bulk analysis” International Journal of Fatigue and Fracture of Engineering Materials and Structures, 36, 1, pp. 75-84.

  24. Withers, P.J.W, Dai,H., P. Lopez-Crespo, A. Steuwer, F. Yusof, J.F. Kelleher, T. Buslaps (2011) “Overload effects on local fatigue crack-tip strain fields in plane stress samples” Forni di Sopra (UD), Italy, March 7-9, ISBN 978-88-95940-32-8.

  25. J.F. Kelleher, P. Lopez-Crespo, F. Yusof, P.J. Withers, (2010) “The use of diffraction to study fatigue crack tip mechanics” in Mechanical Stress Evaluation by Nuetrons and Synchrotron Radiation Materials Science Forum; ed. Y.Akiniwa, K. Akita, H.Suzuki, vol. 652, pp. 216-221.

  26. Yusof, F., Withers, P.J.W., (2009) “Real-time acquisition of fatigue crack images for monitoring crack-tip stress intensity variations within fatigue cycles” Journal of Strain Analysis for Engineering Design.

  27. Kelleher, J., Lopez-Crespo, P., Yusof, F., Withers, P.J.W., (2009) “Diffraction studies of fatigue crack tip mechanics” 5th Intl. Conf on Mech. Stress Eval. by Neutrons and Synchrotron Radiation (MECASENS). Mito, Japan.

  28. Yusof, F., Withers, P.J.W., (2007) “Crack monitoring and stress intensity factor determination using digital image correlation.” The British Society for Strain Measurement (BSSM) one-day seminar and mini-exhibition (Measuring with vision: Developments and innovations in optical metrology for engineering), 3rd May, Bristol.

  29. Yusof, F. (2006) “Three-Dimensional Constraint Based Fracture Mechanics" University of Glasgow (Dept. of Mechanical Engineering).

  30. Yusof, F., Hancock, J.W., (2005) “In-plane and Out-of-plane constraint effects in three-dimensional elastic perfectly-plastic crack tip field” International Conference on Fracture (ICF 11), Turin, Italy

  31. Yusof, F., (2002) "Obeservation and analysis of thin microcracked glass" University of Strathclyde (Dept. of Mechanical Engineering).

  32. Mustapha, M.K., Yusof, F., Ng, C.P., Tan, K.K., (1999) “Liquid Crystal Display: Case Study on Bleeding and Voids” Motorola Malaysia Annual Symposium, Penang, Malaysia.

  33. Yusof, F., Zakaria, R. S., (1999) “High Temperature Resistance Electromechanical Components” Motorola Malaysia Annual Symposium, Penang, Malaysia.
  34. Yusof, F., (1999) “Motorola Penang Liquid Crystal Display Experience” Asia Pacific Liquid Crystal Display Symposium, Penang, Malaysia.

  35. Khong, C.M., Yusof, F., (1998) “6 sigma Mechanical Tolerance Analysis: Case Study of GP 338 Radios” Motorola Malaysia Annual Symposium, Penang, Malaysia.

  36. Yusof, F., Chow, K.M., (1997) “Design and implementation of Tact Switch in GP 338 Radios” Motorola Malaysia Annual Symposium, Penang, Malaysia.

© 2024 FY. All rights reserved.